CYNOSURE / PALOMAR 1540 HANDPIECE , REPAIR OR REFURBISH YOUR HANDPIECE PARP2336
CYNOSURE / PALOMAR 1540 HANDPIECE , REPAIR OR REFURBISH YOUR HANDPIECE
Description
CYNOSURE / PALOMAR 1540 HANDPIECE , REPAIR OR REFURBISH YOUR HANDPIECE
PARP2336
PALOMAR 1540 REFURBISH
You need to understand that the Palomar 1540 Handpiece is very complicated and has many internal parts.
No one can tell what’s wrong with it before opening and checking.
it can be bad optics $325
it can be bad flash lamps $375
it can be bad fiber optic cable $1500
it can be bad laser rod $3250
it can be a bad cavity $1250
It can be Calibration.
We never charge for diagnosis or to test the handpiece.
Usually, repair costs range between $2500 and $6500.
Rebuild
Replaced Flash Lamp
Replace Rod
Test and check the cooling system
Reset shot count
Testing output energy and full calibration
Replace trigger, flow tube, seal kit if required.
CYNOSURE / PALOMAR 1540 HANDPIECE , REPAIR OR REFURBISH YOUR HANDPIECE
Parts4laser is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Cynosure / Palomar their affiliates.
Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners.
The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.
