Description
CANDELA PROÂ LASER HEAD 7122-00-9572 WITH TWO FLASH LAMPS AND ROD
CALH3435
Candela GentleLASE Pro Laser Head packaged and ready for fast delivery.
Parts4Laser offers a great solution for your Candela laser head.
At Parts4Laser we completely rebuild your laser head or we also offer a core replacement. Parts4Laser recommends to rebuild your laser head when you get some of these symptoms:
- When your system setting can not achieve the setting and the power you request.
- When you hear a thumping sound or when you do not get enough speed and energy during treatment.
Our rebuilding service for the laser head will include the following procedure:
Replacing:
- New flash lamps
- New triple bore
- New seal kit include all o-rings
- New light blocking kit
- New flow tubes
- Applying and re-coating with reflective powder.
- Swap your laser head with one of our previously rebuilt laser heads (fully tested and working).
- Send your laser head to us and we will rebuild it for you.
we have Yag and Alex laser head , if you also need a laser rod we can also supply this
CANDELA ALEXANDRITE LASER HEAD ALEX ROD 755NM ROD , CARD1341
Candela GentleLase Pro Laser Head Information
There are several reasons why the laser head can go bad. First, a water leak in the laser head can cause pressure to build up and break the laser rod, which is a device through which the laser goes and cause the rod to crack. One singular crack can make the laser head stop working.
Secondly, there is a reason why we are adamant about the laser being in a spotless-clean environment. If there is a small spec of dust on the optics, the laser will make contact with the dust and thus gradually burn your optic until the laser has nowhere to go except backwards or sideways, which can cause additional components to break. Additionally, dust can also burn laser rod, and even the laser head. It is also important to note that the flow tubes or triple bore can be damaged from water pressure or dust.
Lastly, a Candela GentleLase Pro Laser Head can malfunction or stop working altogether because of a damaged or broken flash lamp. Please pay attention to your lamp life. If you notice your power has decreased significantly, whereby you need more treatments to achieve the same result, it may be time to change your flash lamp.
In order to extend the life of your laser machine, we recommend a preventative maintenance service on your machine every six months. This will help ensure the safety of your patients, your investment, and your business, as a broken machine can cause delays and inability to follow through on advertised services or scheduled appointments.
Parts4laser is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Candela their affiliates. Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners. The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.
