Description
Parts4laser can service and repair you Syneron DSL Handpiece
Syneron DSL Handpiece Refurbish / Rebuild Service. We can rebuild your current Syneron DSL and get it back into working condition
This is a service which includes the rebuilding/refurbishing of your current Syneron DSL Handpiece
We repair, rebuild and refurbish all Syneron DSL Handpieces:
- SR / SRA
- SUBLIME
- DSL
- Motif LHR
- Motif HR
- LV
- LVA
- SR
- SRA
- SRA mini
Process:
- REPLACE FLASH LAMP and SEAL KIT.
- CLEAN AND TEST COOLING SYSTEM.
- POLISH CRYSTAL.
- RESET PULSE COUNT
- CALIBRATE AND VERIFY OUTPUT ENERGY.
*90 DAY WARRANTY ON ALL JOBS
SYSTEM SPECIFICATION
| Applicator | Spectrum | Light Fluence | RF Energy | Treated Area | Max. Pulse Rep Rate | Cooling |
| Sublative | N/A | N/A | Up to 100 mJ/pin | Standard 64: 12 x 12 mm Focal 44: 11 x 3 mm |
1 Hz | N/A |
| Sublime | 700-2000 nm | Up to 6 W/cm² | Up to 200 J/cm³ | 12 x 8 mm | 1 Hz | 10°C |
| SR | 580-980 nm | Up to 45 J/cm² | Up to 25 J/cm³ | 25 x 12 mm | 1 Hz | 5°C |
| SRA | 470-980 nm | Up to 45 J/cm² | Up to 25 J/cm³ | 25 x 12 mm | 1 Hz | 5°C |
| AC | 400-980 nm | Up to 18 J/cm² | Up to 25 J/cm³ | 25 x 12 mm | 1 Hz | 5°C |
| LV | 915 nm | Up to 140 J/cm² | Up to 100 J/cm³ | 8 x 5 mm | 1 Hz | 5°C |
| LVA | 915 nm | 100 – 350 J/cm² | Up to 100 J/cm³ | 8 x 2 mm | 1 Hz | 5°C |
| Motif LHR | 810 nm | Up to 50 J/cm² | Up to 50 J/cm³ | 15 x 12 mm | 10 Hz | 5°C |
| Motif HR | 680 – 980 nm | Up to 45 J/cm² | Up to 25 J/cm³ | 25 x 12 mm | 3 Hz | 5°C |
| Motif IR | 915 nm | Up to 70 J/cm² | Up to 100 J/cm³ | 8 x 5 mm | 10 Hz | 5°C |
| New elos Applicators | ||||||
| Motif HR Plus | 680-980 nm | Up to 35 J/cm² | Up to 25 J/cm³ | 35 x 14 mm | 3 Hz | 5°C |
| SR Plus | 580-980 nm | Up to 35 J/cm² | Up to 25 J/cm³ | 35 x 14 mm | 2 Hz | 5°C |
| SRA Plus | 470-980 nm | Up to 35 J/cm² | Up to 25 J/cm³ | 35 x 14 mm | 2 Hz | 5°C |
| SRA mini | 470-980 nm | Up to 35 J/cm² | Up to 25 J/cm³ | 15 x 14 mm | 1 Hz | 5°C |
Parts4laser all service and refurbish Syneron DSL hand pieces.
Please note that this is a service to refurbish your current hand piece. If you would like to purchase any of these hand pieces, please navigate to the corresponding page, or simply give us a call at 866-444-8883.
We repair, rebuild and refurbish all Syneron hand pieces.
If you would like to ship your equipment to us for a repair, recharge or rebuild.
please ship to:
Parts4Laser
225 COUNTY RD
Tenafly NJ 07670
phone :201-588-9858
Parts4laser is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Candela their affiliates. Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners. The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.
